Topsides and Superstructures

Vessel Area

Crew accomodation and permanent structure above the upper deck.

Filter by

Volume Solids

VOC(EPA Solvent)

Type of Product

Vessel Area

106 Products

Interfine 979SG

Product Type
Cosmetic Finishes

A patented high performance, high volume solids content acrylic polysiloxane cosmetic finish with low solar absorption (LSA) pigmentation providing excellent long term durability.  Interfine 979SG will provide superior gloss and colour retention on exterior exposure compared to typical marine polyurethane finishes.

Intergard 5555

Product Type
Cosmetic Finishes

Intergard 5555 is a two pack semi-gloss epoxy primer/finish with excellent colour retention. Intergard 5555 dries at low temperatures and is used for internal areas such as engine rooms and accommodation areas in newbuilding projects. Intergard 5555 may also be used as a primer over galvanized and stainless steel and is available in a wide range of colours from the Chromascan tinting system.

Intergard 5400

Product Type
Other

A single component, waterbased, Peelable Temporary Protective coating. Intergard 5400 dries to form a non tacky, tough, resilient temporary protective film.

Intergard 7500

Product Type
Universal Primers

Intergard 7500 is a high solids pure epoxy universal primer. Using advanced rheology technology, Intergard 7500 delivers excellent edge retention and anti-corrosive performance in all vessel areas including outer hull and cargo oil tanks. Good abrasion resistance.

Interthane 990LSA

Product Type
Cosmetic Finishes

A two pack, low solar absorbing acrylic polyurethane finish giving excellent durability and reduced thermal heat loads on structural steel.

Interlac 537V

Product Type
Cosmetic Finishes

A chlorinated alkyd based non-flaming interior enamel. NAVSEA approved.

Interzinc 22 - QHA285

Product Type
Primers / Tie Coats

A two pack, solvent based, inorganic zinc rich ethyl silicate primer, containing 85% zinc by weight in the dry film. Provides excellent corrosion protection to correctly prepared steel substrates.

Intergard 7600

Product Type
Universal Primers

Intergard 7600 is a pure epoxy universal primer. With very good anti-corrosive properties, Intergard 7600 is suitable for all vessel areas including outer hull and cargo oil tanks. Suitable for application down to -5°C (41 °F).

Intergard 5263

Product Type
Primers / Tie Coats

Intergard 5263 is an epoxy tie coat which maximises adhesion of anti-fouling coatings to existing coatings. Designed for low temperature use. Suitable for use in new construction and maintenance, Intergard 5263 is highly versitile and is compatible with a wide range of new and aged coatings.

Interstores Alkyd

Product Type
Cosmetic Finishes

Interstores Alkyd is a one pack alkyd gloss cosmetic finish that has been formulated to allow excellent brush and roller application. Easily recoatable Interstores Alkyd is ideal for on board maintenance projects. Interstores Alkyd can be used on all areas above the waterline.

Pages