A quick drying, one pack primer. Interstores Alkyd Primer is surface tolerant, compatible with most substrates andcan be overcoated with a wide range of finishes.

A two pack, solvent based, inorganic zinc rich ethyl silicate primer, containing 85% zinc by weight in the dry film. Provides excellent corrosion protection to correctly prepared steel substrates.

A <340g/l VOC light coloured, abrasion resistant, aluminium pure epoxy coating giving excellent long term anticorrosive protection and low temperature application capability.

Interstores Polyurethane is a durable two pack, acrylic polyurethane gloss finish. Interstores Polyurethane is used as a cosmetic finish on above water areas such as topsides, external superstructures and external decks and is for on board maintenance projects only.

A low gloss, two pack polyurethane finish providing excellent durability and extended overcoating intervals and available in low solar absorbing pigmentation.

A one pack oleoresinous/ aluminium coating.

A single pack modified polyvinyl butyral/phosphoric acid etch primer free from zinc chromate.

Low VOC Polyurethane Finish

Intersheen 579 is a low temperature and fast drying, one pack, modified acrylic finish. Intersheen 579 is used as a cosmetic finish in above water areas for newbuilding, maintenance & repair or on board maintenance projects. Interfine 579 is available in a wide range of colours from the Chromascan tinting system.

A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating.

A two pack, low solar absorbing acrylic polyurethane finish giving excellent durability and reduced thermal heat loads on structural steel.

A two pack, waterborne epoxy primer. Suitable for use as a primer offering corrosion protection for some above water and internal areas.

Interfine 878 is a patented high performance, high volume solids, isocyanate-free, two component, acrylic polysiloxane, thin film cosmetic finish providing excellent long term durability. Interfine 878 significantly improves upon the gloss and colour retention exhibited by typical polyurethane finishes. Interfine 878 is used as a cosmetic finish in above water areas for newbuilding and major refurbishment projects. Interfine 878 is available in a wide range of colours from the Chromascan tinting system.

A single component, waterbased, Peelable Temporary Protective coating. Intergard 5400 dries to form a non tacky, tough, resilient temporary protective film.

A two pack epoxy finish. Exhibits excellent abrasion, chemical and solvent resistance.