BACK TO PRODUCTS

Ballast Tanks

Vessel Area

The compartment within the vessel that holds the water ballast to improve the stability of the ship and increase its draught or change the trim if necessary.

cases

Samco Raven and Intershield 300

Filter by

Volume Solids

VOC(EPA Solvent)

Type of Product

Vessel Area

21 Products

Intergard 269
Product Type
Primers / Tie Coats

A quick drying two pack epoxy holding primer / tie coat which is suitable for overcoating after extended periods of weathering.

Intershield 300
Product Type
Universal Primers

With over 30 years track record and over 22,000 vessels painted, Intershield 300 sets the standard for universal primers. An abrasion resistant, aluminium pigmented pure epoxy coating with excellent long term anticorrosive protection and low temperature application capability. Excellent edge retention.

Intergard 840
Product Type
Primers / Tie Coats

A high solids, light coloured tar-free epoxy anticorrosive

Intertuf 26
Product Type
Primers / Tie Coats

A one pack bituminous coating, specifically formulated to give economic protection of internal steel surfaces.  Intertuf 26 is resistant to acids, alkalis and sea water and can be applied at low temperature.

Interbond 808
Product Type
Water Ballast Tank Coatings

With high volume solids and surface tolerance, Interbond 808 is suitable for application as a one or two coat system over grit blasted, hydroblasted or mechanically cleaned surfaces.

Intergard 787
Product Type
Universal Primers

A high volume solids, light coloured, aluminium pure epoxy universal primer with good corrosion and abrasion resistance. Suitable for low temperature application.

Interbond 998
Product Type
Water Ballast Tank Coatings

A tar free, edge retentive, two pack epoxy. Interbond 998 can be applied as a one or two coat system over grit blasted, hydroblasted, mechanically or hand tool cleaned surfaces. It is also tolerant of damp and rusted surfaces (see limitations section).

Intershield 300V
Product Type
Universal Primers

A <340g/l VOC light coloured, abrasion resistant, aluminium pure epoxy coating giving excellent long term anticorrosive protection and low temperature application capability.

Interline 783 UV Exposed
Product Type
Cargo Tank Coatings

Light coloured, high solids, fast cure, tar free, two pack epoxy anticorrosive.

Interline 783 NON UV exposed
Product Type
Cargo Tank Coatings

Light coloured, high solids, fast cure, tar free, two pack epoxy anticorrosive.

Pages

Products by vessel area

Ballast Tanks

Ballast Tanks

The compartment within the vessel that holds the w...
Cargo Holds

Cargo Holds

The primary container for the stowage of the vesse...