Epoxy Sealer Coat
Interbond 600
A two pack, surface tolerant, solvent free, clear epoxy sealer.
Filter by
Products
My Filters
Epoxy Primer
Intershield 486
A high solids epoxy primer. Developed to meet the requirements of MIL-PRF-24667C, Type VIII Composition G & L primer system.
Epoxy Tie Coat
Intergard 5263
Intergard 5263 is an epoxy tie coat which maximises adhesion of anti-fouling coatings to existing coatings. Designed for low temperature use. Suitable for use in new construction and maintenance, Intergard 5263 is highly versitile and is compatible with a wide range of new and aged coatings.
Sealing Putty
Intershield 89
A one pack, soft, workable, non sagging, non-curing, sealing compound. Designed to adhere to most shipboard materials. May be overcoated.
Inorganic Zinc-Rich Silicate
Interzinc 22 - QHA285
A two pack, solvent based, inorganic zinc rich ethyl silicate primer, containing 85% zinc by weight in the dry film. Provides excellent corrosion protection to correctly prepared steel substrates.
Epoxy Primer
Interseal 670HS - Temperate - Global
A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating.
High Build Epoxy Non-Skid
Intershield 417
A high build, two pack epoxy non-skid coating, applied in a single coat.
Low Profile Non Skid Polyurethane
Interthane 863
A two pack polyurethane low profile non-skid finish incorporating low solar absorbent pigmentation.
Pure Epoxy Anticorrosive
Interbond 373
An aluminium, tar free, surface tolerant, rapid dry two pack pure epoxy coating. Interbond 373 is capable of being applied as a one or two coat system over grit, hydroblasted or mechanically cleaned surfaces.
High Profile Non Skid Polyurethane Finish
Interthane 864
A two pack polyurethane high profile non-skid finish incorporating low solar absorbent pigmentation.
Silicone Alkyd Finish
Interlac 2
A one pack, high solids, semi-gloss silicone alkyd finish with low solar absorption (LSA) pigmentation. Provides superior performance and lower heat absorption in comparison to unmodified alkyd finishes. Excellent color and gloss retention. Easy to apply and recoat. Low VOC.
Pure Epoxy
Intergard 400
A two pack epoxy coating, containing micaceous iron oxide, which can be overcoated after extended periods.
Alkyd Primer
Interprime 298
A fast drying, modified alkyd primer, with good substrate tolerance. Can be overcoated with alkyd, polyurethane, acrylic, and other thermoplastic finishes. Simplifies painting for the crew and minimizes costs of on board maintenance by reducing paint stock and wastage. Low VOC.