Cargo Holds
Vessel Area
The primary container for the stowage of the vessels's dry cargo either in containers, sacks or loose cargo.
28 Products
Share product selection
SimpleMailto
Digg
Facebook
LinkedIn
TwitterInterbond 201 - Low Temperature
LOW TEMPERATURE. A hard wearing, surface tolerant, two pack epoxy primer/finish offering corrosion protection in one coat. A temperate version of Interbond 201 is also available for use above 5°C
Interbond 201 - Temperate
A hard wearing, surface tolerant, two pack epoxy primer/finish offering corrosion protection in one coat.A low temperature version of Interbond 201 is available for use down to -5°C.
Intergard 269
A quick drying two pack epoxy holding primer / tie coat which is suitable for overcoating after extended periods of weathering.
Intergard 400
A two pack epoxy coating, containing micaceous iron oxide, which can be overcoated after extended periods.
Intergard 5000
A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces (see limitations section).
Intergard 5101
Intergard 5101 is an epoxy universal primer for use in ballast tanks, outer hulls, cofferdams,
void spaces decks, cargo holds and crude oil tanks. Suitable for use with controlled cathodic
protection
Intergard 5600
A light coloured, epoxy universal primer.
Intergard 5620
A light coloured, epoxy universal primer which is winter workable down to -5°C.
Intergard 7020
A two pack, abrasion resistant aluminium pure epoxy with good anticorrosive performance.
Intergard 740
A two pack epoxy finish.
