Primers / Tie Coats

Product Type

Filter by

Products

55 Product Found
My Filters
    Zinc Phosphate Primer
    Interprime 538
    A one pack alkyd primer containing zinc phosphate anticorrosive pigment.
    Epoxy Sealer Coat
    Interbond 600
    A two pack, surface tolerant, solvent free, clear epoxy sealer.
    Waterborne Primer
    Intercryl 690
    An ultra low VOC, water-based primer that is fast drying and has flexible overcoating properties.
    Solvent Free Epoxy
    Interzone 101
    A two pack solvent free epoxy which can be applied underwater and will cure underwater to give a corrosion and abrasion resistant coating.
    Epoxy
    Formula 152 Topcoat (MIL-DTL-24441 Type IV)
    A two pack epoxy finish. Exhibits excellent abrasion, chemical and solvent resistance.
    Epoxy Tie Coat
    Intergard 5263
    Intergard 5263 is an epoxy tie coat which maximises adhesion of anti-fouling coatings to existing coatings. Designed for low temperature use. Suitable for use in new construction and maintenance, Intergard 5263 is highly versitile and is compatible with a wide range of new and aged coatings.
    Inorganic Zinc-Rich Silicate
    Interzinc 22 - QHA285
    A two pack, solvent based, inorganic zinc rich ethyl silicate primer, containing 85% zinc by weight in the dry film. Provides excellent corrosion protection to correctly prepared steel substrates.
    Chromate Free Etch Primer
    Interprime 539
    A single pack modified polyvinyl butyral/phosphoric acid etch primer free from zinc chromate.
    Alkyd Primer
    Interprime 321
    An alkyd primer, the moisture resistance of which is enhanced by the leafing characteristics of aluminum pigmentation giving effective sealing of timber and preventing uneven absorption of subsequent finishing coats.
    Water Based Primer
    Intergard 5755WB
    A two pack, waterborne epoxy primer. Suitable for use as a primer offering corrosion protection for some above water and internal areas.
    Epoxy
    Formula 151 Topcoat (MIL-DTL-24441 Type IV)
    A two pack epoxy finish. Exhibits excellent abrasion, chemical and solvent resistance.
    Epoxy Anticorrosive
    Intertuf 362
    Intertuf 362 is an versatile surface tolerant epoxy primer. With good resistance to water and some chemicals, Intergard 263 is suitable for most vessel areas. Low temperature cure.
    Pure Epoxy Anticorrosive
    Interbond 373
    An aluminium, tar free, surface tolerant, rapid dry two pack pure epoxy coating. Interbond 373 is capable of being applied as a one or two coat system over grit, hydroblasted or mechanically cleaned surfaces.
    Modified Epoxy Primer
    Intergard 267
    A two pack, tar free, epoxy tie coat.
    High Build Epoxy Primer
    Interprime 820
    A two pack epoxy primer suitable for use above and below the water.
    Fetching the data, please wait...