Primers / Tie Coats
58 Products
Share product selection
SimpleMailto
Digg
Facebook
LinkedIn
TwitterFormula 150 Primer (MIL-DTL-24441)
A two pack epoxy primer with low VOC, good corrosion resistance, good long-term weathering protection and fast drying.
Formula 150 Primer (MIL-DTL-24441Type IV)
A two pack epoxy primer with low VOC, good corrosion resistance, good long-term weathering protection and fast drying.
Formula 151 Topcoat (MIL-DTL-24441 Type IV)
A two pack epoxy finish. Exhibits excellent abrasion, chemical and solvent resistance.
Formula 151 Topcoat (MIL-DTL-24441)
A two pack epoxy finish. Exhibits excellent abrasion, chemical and solvent resistance.
Formula 152 Topcoat (MIL-DTL-24441 Type IV)
A two pack epoxy finish. Exhibits excellent abrasion, chemical and solvent resistance.
Formula 152 Topcoat (MIL-DTL-24441)
A two pack epoxy finish. Exhibits excellent abrasion, chemical and solvent resistance.
Interbond 201 - Low Temperature
LOW TEMPERATURE. A hard wearing, surface tolerant, two pack epoxy primer/finish offering corrosion protection in one coat. A temperate version of Interbond 201 is also available for use above 5°C
Interbond 201 - Temperate
A hard wearing, surface tolerant, two pack epoxy primer/finish offering corrosion protection in one coat.A low temperature version of Interbond 201 is available for use down to -5°C.
Interbond 373
An aluminium, tar free, surface tolerant, rapid dry two pack pure epoxy coating. Interbond 373 is capable of being applied as a one or two coat system over grit, hydroblasted or mechanically cleaned surfaces.
Intercryl 544
A water-based, low VOC content primer. Fast drying with flexible overcoating properties.