Decks
The horizontal structure covering the hull of the ship. Provides structural strength to the ship and support for people and equipment.
79 Products
Share product selectionInterbond 201 - Low Temperature
LOW TEMPERATURE. A hard wearing, surface tolerant, two pack epoxy primer/finish offering corrosion protection in one coat. A temperate version of Interbond 201 is also available for use above 5°C
Interbond 201 - Temperate
A hard wearing, surface tolerant, two pack epoxy primer/finish offering corrosion protection in one coat.A low temperature version of Interbond 201 is available for use down to -5°C.
Interbond 373
An aluminium, tar free, surface tolerant, rapid dry two pack pure epoxy coating. Interbond 373 is capable of being applied as a one or two coat system over grit, hydroblasted or mechanically cleaned surfaces.
Interbond 600
A two pack, surface tolerant, solvent free, clear epoxy sealer.
Interbond 808
A light coloured, tar free, surface tolerant, two pack epoxy coating with high volume solids (82%). Interbond 808 is capable of being applied as a one or two coat system over grit blasted, hydroblasted or mechanically cleaned surfaces. It is also tolerant of damp surfaces (see limitations section).
Intercryl 588
A one pack LSA waterborne non-skid deck finish with low odor based on weather resistant acrylic copolymer technology. Medium profile. NAVSEA approved.
Interfine 979SG
A patented high performance, high volume solids content acrylic polysiloxane cosmetic finish with low solar absorption (LSA) pigmentation providing excellent long term durability. Interfine 979SG will provide superior gloss and colour retention on exterior exposure compared to typical marine polyurethane finishes.
Intergard 264
A two pack, self priming, surface tolerant epoxy with low semi-gloss finish. Exhibits excellent chemical and abrasion resistance. A low temperature cure version is available. Low VOC.
Intergard 264 - Low Temperature
A two pack, self priming, surface tolerant epoxy with low semi-gloss finish. Exhibits excellent chemical and abrasion resistance. A low temperature cure version is available. Low VOC.
Intergard 269
A quick drying two pack epoxy holding primer / tie coat which is suitable for overcoating after extended periods of weathering.