Abrasion Resistant / Cargo Hold Coatings

Product Type

Filter by

Products

10 Product Found
My Filters
    Abrasion Resistant Aluminium Pure Epoxy
    Intershield 300V
    A <340g/l VOC light coloured, abrasion resistant, aluminium pure epoxy coating giving excellent long term anticorrosive protection and low temperature application capability.
    Pure Epoxy
    Intergard 400
    A two pack epoxy coating, containing micaceous iron oxide, which can be overcoated after extended periods.
    Abrasion Resistant Epoxy
    Intershield 163 Inerta 160
    Intershield 163 Inerta 160 is a high performance coating for ice-going vessels. With more than 40 years of track record, owners and operators can be sure proven performance. Low ice adhesion. Low frictional resistance. Designed for operation at temperatures as low as -50°C.
    Abrasion Resistant Epoxy
    Intershield 803Plus
    Built on the track record of Intershield 803, the pure epoxy Intershield 803Plus represents the ultimate level of abrasion and impact resistance for cargo holds. Optimised for the most demanding hard cargo such as iron ore and coal, Intershield 803Plus further extends cargo hold coating life and reduces maintenance costs.
    Abrasion Resistant Aluminium Pure Epoxy
    Intershield 300
    With over 30 years track record and over 22,000 vessels painted, Intershield 300 sets the standard for universal primers. An abrasion resistant, aluminium pigmented pure epoxy coating with excellent long term anticorrosive protection and low temperature application capability. Excellent edge retention.
    Epoxy Primer/Finish
    Interbond 201 - Temperate
    A hard wearing, surface tolerant, two pack epoxy primer/finish offering corrosion protection in one coat.A low temperature version of Interbond 201 is available for use down to -5°C.
    Abrasion Resistant Aluminium Pure Epoxy
    Intergard 7020
    A two pack, abrasion resistant aluminium pure epoxy with good anticorrosive performance.
    Abrasion Resistant Epoxy
    Intershield 803
    Intershield 803 is a highly abrasion resistant pure epoxy excellent mechanical properties and impact resistance. Designed specifically to minimise cargo hold maintenance costs where hard cargo such as iron ore and coal are transported.
    Abrasion Resistant Glass Flake Epoxy
    Interzone 954GF
    Interzone 954GF is a high performance, impact and abrasion resistant anti-corrosive epoxy glass flake coating with good surface tolerance. Suitable for both New build and Maintenance & Repair uses across most vessel areas subject to high wear, including cargo holds and decks. The product has excellent adhesion to surfaces prepared using dry grit-blasting, hydro-blasting and slurry-blasting processes. It can be applied as a single or multi-coat systems, providing opportunities for material and time savings in-dock or during on-board maintenance.
    Epoxy Primer/Finish
    Interbond 201 - Low Temperature
    LOW TEMPERATURE. A hard wearing, surface tolerant, two pack epoxy primer/finish offering corrosion protection in one coat. A temperate version of Interbond 201 is also available for use above 5°C
    Fetching the data, please wait...